GW Instek GSP-730 User Manual - Manual (Page 54)

GSP-730 User Manual
52
disabled.
2. The display splits into two screens. The top
screen shows the sweep waveform. The bottom
screen shows the ACPR settings and
measurement results in real time.
 Turn ACPR off to return back to the normal mode.
Channel setup Measurements
3. Press Channel Setup…[F1] and set the following:
Main CH BW[F1] Set the bandwidth of the
main channel.
Main CH Space[F2] Specify the channel
spacing.
Note The main channel bandwidth and space
settings are shown in the setup area at the
bottom of the screen, not on the soft-key icon.
Channel BW
Channel space