GW Instek GSP-730 User Manual - Manual (Page 19)

GETTING STARTED
17
First Time Use Instructions
Use the procedures below when first using the GSP-730 to tilt the
stand, power up the instrument, update the firmware and restore
the unit back to the default settings. Lastly, the Conventions
sections will introduce you to the basic operating conventions used
throughout the user manual.
Tilting the Stand
Description The GSP-730 has two adjustable tabs at the
front that can be used to position the
instrument into two preset orientations.
Leaning Position Set the tabs down to
have the GSP-730
leaning backward.
Upright Position Set the tabs flat to
have the GSP-730 in
an upright position.