GW Instek GSP-730 User Manual - Manual (Page 76)

GSP-730 User Manual
74
Operation 1. Insert a USB flash drive into the USB port.
2. Press
Hardcopy
and the image file will begin
saving.
 Wait a few moments for the file to save. When the file
has finished saving, “Screen Saved OK” will appear
at the bottom of the display.
Note
The file name will be automatically created in the
following format:
File name: SCRXX.bmp
Where XX is a number that is incremented each
time the file is saved.
Warning
Do not remove the USB drive until the file has
completed saving.
Hardcopy Setup
Description The Hardcopy Setup key is used set the image
file properties of the bitmap file that is created
when the Hardcopy key is pressed.
Ink Normal: This is the normal, default
image setting.
Ink Saving: This will invert all the colors
on the display so that the file
will conserve ink when
printed.
Operation 1. Press Hardcopy
Setup
and choose the image type:
Ink Normal[F1]
Ink Saving[F2]