GW Instek GSP-730 User Manual - Manual (Page 73)

BASIC OPERATION
71
Save/Recall Files
The GSP-730 can save and recall setup data, trace data and limit
line data to and from internal memory. There are five memory
locations for each save file type. These files cannot be saved to USB.
The Hardcopy key can be used to save image files to a USB flash
drive.
Save/Recall Setup
Description Setup data contains all the data necessary to
recall the state of the GSP-730 to known state.
Setup data contains the following data:
Center frequency, Start frequency, Stop
frequency, Step frequency, Ref. Level, Scale,
Units, RBW
Save 1. To save the current settings, press
Memory >
Setup To[F1] and choose a memory location to
save to with the arrow keys.
Setup To: 1~5
2. Press Setup To[F1] again to execute the save.
Recall 1. To recall a setup, press
Memory > Setup From[F2]
and choose a memory location to recall from
with the arrow keys.
Setup From: 1~5
2. Press Setup From[F2] again to execute the recall.