Command syntax – GW Instek GSP-730 User Manual User Manual

Page 83

REMOTE CONTROL

This should return the Manufacturer, Model
number, Serial number, and Firmware version
in the following format.



GW-INSTEK, GSP-730, XXXXXXXX, V.VV

Manufacturer: GW-INSTEK
Model number : GSP-730
Serial number : XXXXXXXXXXXX
Firmware version : V.VV

Note

For further details or if you have trouble running
this function check, please see the programming
manual, available on the GW Instek web site @
www.gwinstek.com.

Command Syntax

Compatible
Standard

IEEE488.2

Partial compatibility

SCPI, 1999

Partial compatibility

Command
Structure

SCPI (Standard Commands for Programmable
Instruments) commands follow a tree-like
structure, organized into nodes. Each level of
the command tree is a node. Each keyword in a
SCPI command represents each node in the
command tree. Each keyword (node) of a SCPI
command is separated by a colon (:).

For example, the diagram below shows an SCPI
sub-structure and a command example.

meas

:freq

:stp?

:cen?

:st?

meas:freq:cen?