Fire-Lite MS-9050UDC Addressable Fire Alarm Control Panel User Manual
Fire-Lite Equipment
This manual is related to the following products:
Table of contents
Document Outline
- Table of Contents
- Section 1: Product Description
- Section 2: Installation
- 2.1 Mounting the Backbox
- 2.2 Mounting the Chassis/Transformer/Main Circuit Board
- 2.3 Power
- 2.4 Relays
- 2.5 Notification Appliance Circuits
- 2.6 UL Power-limited Wiring Requirements
- 2.7 Digital Communicator
- 2.8 Optional Modules/Accessories Installation
- 2.9 ANN-BUS Devices
- Section 3: Programming
- 3.1 Programming Data Entry
- 3.2 User Programming
- 3.3 Initial Power-up
- 3.4 Programming Screens Description
- 3.5 Programming and Passwords
- 3.6 Master Programming Level
- 3.7 Maintenance Programming Level
- Section 4: Operating Instructions
- 4.1 Panel Control Buttons
- 4.2 Status Indicators and LEDs
- 4.3 Normal Operation
- 4.4 Trouble Operation
- 4.5 Alarm Operation
- 4.6 Supervisory Operation
- 4.7 Process Monitor Operation
- 4.8 Hazard/Tornado Condition Operation
- 4.9 Medical Alert Condition Operation
- 4.10 NAC Operation
- 4.11 Programmed Zone Operation
- 4.12 Disable/Enable Operation
- 4.13 Waterflow Circuits Operation
- 4.14 Detector Functions
- 4.15 Time Functions: Real-Time Clock
- 4.16 Synchronized NAC Operation
- 4.17 Coded Operation
- 4.18 Presignal
- 4.19 Positive Alarm Sequence
- 4.20 Special System Timers
- 4.21 Walktest
- 4.22 Read Status
- Section 5: Central Station Communications
- Section 6: Local/Remote Site Upload/Download
- Section 7: Power Supply Calculations
- Appendix A: Software Zones
- Appendix B: Default Programming
- Appendix C: NFPA Standard-Specific Requirements
- Appendix D: FACP with Keltron
- Appendix E: Wire Requirements
- Appendix F: HVAC Control
- Appendix G: Ademco Contact ID Format Event Code Descriptions
- Appendix H: Canadian Application
- Index