Fire-Lite MS-9050UDC Addressable Fire Alarm Control Panel - Manual (Page 141)

MS-9050 Series Manual — P/N 52413:G 4/14/2014 141
Read Status Operating Instructions
• Lock Enable/Disable
• Acknowledge Button Enable/Disable
• Silence Button Enable/Disable
• Reset Button Enable/Disable
• Drill Button Enable/Disable
Pressing 2 for ANN-SECONDARY Options, while viewing ANN-BUS Screen #2 will display
screens detailing the settings for this device and would display the following screen:
4.22.11 Phone Line
Pressing 2 while viewing Read Status Screen #4 will display the following screen:
This screen indicates the both the Primary and Secondary phone lines have been configured for
touchtone dialing operation.
4.22.12 Central Station
Pressing 3 while viewing Read Status Screen #4 will display the following screens:
Central Station Screen #1 indicates whether the Central Station Reporting is enabled or disabled, if
the Reports will be sent to one or both the Primary and Secondary Central Station phone numbers
and the Call Limit for DACT trouble calls within a 24 hour period. Central Station Screen #2 pro-
vides information on the Primary and Secondary Central Station programming which includes:
• Test Time Interval
• Account Code
• 24 Hour Test Time
• Phone Number
• Communication Format
• Event Codes
4.22.13 Service Terminal
Pressing 1 for Ring Count, while viewing Read Status Screen #5 will display the following screens:
ANN-SECONDARY
ENABLED
ANN-SECONDARY Screen #2
PHONE LINE
PRIMARY TOUCHTONE
SECONDARY TOUCHTONE
READ STATUS
1=ANN-BUS
2=PHONE LINE
3=CENTRAL STATION
Read Status Screen #4
CENTRAL STATION
REPORTING ENABLED
REPORT BOTH
CALL LIMIT 10
Central Station Screen #1
CENTRAL STATION
1=PRIMARY
2=SECONDARY
3=REPORT STYLE
Central Station Screen #2
READ STATUS
1=SERVICE TERMINAL
2=PRINT
3=TIME-DATE
Read Status Screen #5
SERVICE TERMINAL
RING COUNT 03
Service Terminal Screen