Fire-Lite MS-9050UDC Addressable Fire Alarm Control Panel - Manual (Page 49)

MS-9050 Series Manual — P/N 52413:G 4/14/2014 49
ANN-BUS Devices Installation
2.9.6 ANN-LED Annunciator Module
The ANN-LED and ANN-RLED annunciator modules provide LED annunciation of general sys-
tem faults and input zones/points when used with a compatible FACP. The ANN-LED module pro-
vides alarm (red), trouble (yellow) and supervisory (yellow) indication for up to ten input zones or
addressable points. The ANN-RLED provides alarm (red) indication for up to 30 input zones or
addressable points. Multiple ANN-(R)LED modules may be used for full system coverage.
Specifications
• Max. ANN-BUS Voltage: 24 VDC
• Max. Current:
 Alarm: 68 mA
 Standby: 28 mA
• Operating Temperature: 32
o
F to 120
o
F (0
o
C to 49
o
C)
• For indoor use in a dry location only
Mounting and Installation
The ANN-LED Module is supplied with a metal backbox, mounting bracket, and cover. Refer to
the ANN-LED Installation Document #53032 for more information.
Figure 2.20 ANN-LEDs (shown in possible stacked configuration)
an
n-
ledst
a
cke
d.w
m
f
Figure 2.21 Exploded View of ANN-LED
an
n-
led
.wmf