Brocade Fabric OS Encryption Administrator’s Guide Supporting HP Secure Key Manager (SKM) and HP Enterprise Secure Key Manager (ESKM) Environments (Supporting Fabric OS v7.2.0) - Manual (Page 74)

54 Fabric OS Encryption Administrator’s Guide (SKM/ESKM)
53-1002923-01
Adding a switch to an encryption group
2
6. Enter the location where you want to store the public key certificate that is used to
authenticate connections to the key vault, or browse to the desired location, then click Next.
The Confirm Configuration dialog box displays. (Refer to Figure 29 .) Confirm the encryption
group name and switch public key certificate file name you specified are correct, then click
Next.
FIGURE 29 Confirm Configuration dialog box
The Configuration Status dialog box displays. (Refer to Figure 30 .)
FIGURE 30 Configuration Status dialog box