Brocade Fabric OS Encryption Administrator’s Guide Supporting HP Secure Key Manager (SKM) and HP Enterprise Secure Key Manager (ESKM) Environments (Supporting Fabric OS v7.2.0) - Manual (Page 136)

116 Fabric OS Encryption Administrator’s Guide (SKM/ESKM)
53-1002923-01
Viewing and editing encryption group properties
2
When the first encryption engine comes back online, the encryption group’s failback
setting determines whether the first encryption engine automatically resumes encrypting
and decrypting traffic to its encryption targets. In manual mode, the second encryption
engine continues handling the traffic until you manually invoke failback using the CLI, or
until the second encryption engine fails.
• Key Vault Type: HP Secure Key Manager (SKM). The HP Key Vault Type name is shown as
HP Secure Key Manager (SKM) for both SKM and Enterprise Secure Key Management
(ESKM) Key Vault Types.
• REPL Support: (DPM key vault only.) Shown as Not Applicable.
• Primary Key Vault IP Address: The IP address of the primary key vault, either IPv4 or host
name.
• Primary Key Vault Connection Status: The status of the primary key vault link. In an
operating environment, the status should be Connected. Other options are:
- Unknown/Busy
- Not configured
- Not responding
- Failed authentication
• Backup Key Vault IP Address: (Optional.) The IP address of the backup key vault. This field
can be left blank.
• Backup Key Vault Connection Status: The status of the backup key vault link. Options are:
- Connected
- Unknown/Busy
- Not configured
- Not responding
- Failed authentication
• High Availability Mode: (KMIP key vault only.) Shown as Not Applicable.
• User Authentication: (KMIP key vault only.) Shown as Not Applicable.
• Certificate Type: (KMIP key vault only.) Shown as Not Applicable.
• Vendor Name: (KMIP key vault only.) Shown as Not Applicable.
• Primary Key Vault Certificate table: Displays the details of the primary vault certificate; for
example, version and signature information. The Load from File button allows you to locate
and load a primary key vault certificate from a different location.
• Backup Key Vault Certificate table: Displays the details of the backup vault certificate; for
example, version and signature information. The Load from File button allows you to locate
and load a backup key vault certificate from a different location.