Brocade Fabric OS Encryption Administrator’s Guide Supporting HP Secure Key Manager (SKM) and HP Enterprise Secure Key Manager (ESKM) Environments (Supporting Fabric OS v7.2.0) - Manual (Page 69)

Fabric OS Encryption Administrator’s Guide (SKM/ESKM) 49
53-1002923-01
Creating an encryption group
2
FIGURE 23 Configuration Status dialog box
All configuration items have green check marks if the configuration is successful. A red stop
sign indicates a failed step. A message displays below the table, indicating the encryption
switch was added to the group you named, and the public key certificate is stored in the
location you specified.
After configuration of the encryption group is completed, Brocade Network Advisor sends API
commands to verify the switch configuration. See
“Understanding configuration status results”
on page 50 for more information.
13. Review important messages, then click Next.
The Next Steps dialog box displays. (Refer to Figure 24 .) Instructions for installing public key
certificates for the encryption switch are displayed.