High availability clusters, Ha cluster configuration rules – Brocade Fabric OS Encryption Administrator’s Guide Supporting HP Secure Key Manager (SKM) and HP Enterprise Secure Key Manager (ESKM) Environments (Supporting Fabric OS v7.2.0) User Manual
Page 174
154
Fabric OS Encryption Administrator’s Guide (SKM/ESKM)
53-1002923-01
High availability clusters
3
Group Leader Node Name: 10:00:00:05:1e:41:9a:7e
Encryption Group state: CLUSTER_STATE_CONVERGED
Node Name: 10:00:00:05:1e:41:9a:7e (current node)
State: DEF_NODE_STATE_DISCOVERED
Role: GroupLeader
IP Address: 10.32.244.71
Certificate: GL_cpcert.pem
Current Master Key State: Not configured
Current Master KeyID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
Alternate Master Key State:Not configured
Alternate Master KeyID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
EE Slot: 0
SP state: Operational; Need Valid KEK
Current Master KeyID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
Alternate Master KeyID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
No HA cluster membership
Node Name: 10:00:00:05:1e:39:14:00
State: DEF_NODE_STATE_DISCOVERED
Role: MemberNode
IP Address: 10.32.244.60
Certificate: enc1_cpcert.pem
Current Master Key State: Not configured
Current Master KeyID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
Alternate Master Key State:Not configured
Alternate Master KeyID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
EE Slot:
0
SP state: Unknown State
Current Master KeyID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
Alternate Master KeyID: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
No HA cluster membership
High availability clusters
A high availability (HA) cluster consists of exactly two encryption engines configured to host the
same CryptoTargets and to provide Active/Standby failover and failback capabilities in a single
fabric. Failback occurs automatically by default, but is configurable with a manual failback option.
All encryption engines in an encryption group share the same DEK for a disk or tape LUN.
HA cluster configuration rules
The following rules apply when configuring an HA cluster:
•
The encryption engines that are part of an HA cluster must belong to the same encryption
group and be part of the same fabric.
•
An HA cluster cannot span fabrics and it cannot provide failover/failback capability within a
fabric transparent to host MPIO software.
•
HA cluster configuration and related operations must be performed on the group leader.
•
HA clusters of FS8-18 blades should not include blades in the same DCX Backbone chassis.