9 data files and format> 9-8 – Yokogawa Extractive Oxygen Gas Analyzer TDLS220 User Manual
Page 80
<9 DATA FILES AND FORMAT> 9-8
IM 11Y01B02-01E-A 4th Edition September 11, 2012-00
9.2 Downloading (Transferring/Exporting) the Data:
All the files can be easily transferred from the analyzer to the supplied USB memory device.
Simply insert the memory device and wait for the Data Transfer to complete. Do not remove the device
before the transfer is complete. The analyzer will advise via the user interface when Data Transfer is
complete. For totally blind units (i.e. no user interface) wait for the indicating LED to stop blinking/
flashing for at least 5 minutes to ensure the transfer is complete.
NOTES: Please use the supplied “SanDisk” USB memory device with when
getting data from the analyzer. Each analyzer is supplied with one pre-tested
USB memory devices – please retain them and use with each appropriate
analyzer.
If an un-recognized USB memory device is used, then the MS Windows XPe operating system may
attempt to install new hardware. This will not affect the normal operation of the analyzer however, if you
have a full display interface operational a Windows based pop-up may ask for a system reboot.
Do not attempt to plug in any other USB based products (keyboards, WiFi, etc.) in to the USB ports –
Windows based hardware conflicts may occur.
Figure 19 - USB Data Port