Yokogawa Extractive Oxygen Gas Analyzer TDLS220 - Manual (Page 43)

<6 BASIC OPERATION> 6-13
IM 11Y01B02-01E-A 4th Edition September 11, 2012-00
ONLINE VALIDATIONS – DO NOT USE FOR
TDLS220
ADVANCED DATA MENU
ALARM HISTORY – shows chronological list of
analyzer’s most recent alarms.
CAL HISTORY – shows chronological list of analyzer’s
recent calibrations.
SPECTRUM CAPTURE – selection of AUTOMATIC
(user will be prompted to select capture interval,
number of UPDATES to trigger capture, RELATIVE
concentration level trigger which is a % of reading
change, or ABSOLUTE concentration level to trigger
capture); in addition the software will prompt for
number of spectra to capture when a Warning or
Fault occurs. MANAUL selection will result in spectra
capture only when requested by user.
RECORD RESULT DATA – The default setting during
normal operation is “User Data”. The system should
only be switched to “Factory Data” when advised by
Yokogawa Laser Analysis Division. Note: recording
Factory Data is only for specific diagnostic purposes
and should not be selected under normal operation.