Yokogawa Extractive Oxygen Gas Analyzer TDLS220 - Manual (Page 79)

<9 DATA FILES AND FORMAT> 9-7
IM 11Y01B02-01E-A 4th Edition September 11, 2012-00
Determine whether or not the analyzer should capture spectrum
files under a WARNING condition.
Note: this may be useful to do so however, if the Warning alarm
conditions are not set correctly then there could be excessive files
created for less meaningful Warning alarm conditions.
An example is a low transmission warning alarm set at 70% for an
application that often runs at less than 70% transmission.
Determine whether or not the analyzer should capture spectrum
files under a FAULT condition.
Note: this may be useful to do so however, if the Fault alarm
conditions are not set correctly, then there could be excessive files
created for less meaningful Fault alarm conditions.
These files are often useful for Factory based diagnostics.