Yokogawa Extractive Oxygen Gas Analyzer TDLS220 - Manual (Page 77)

<9 DATA FILES AND FORMAT> 9-5
IM 11Y01B02-01E-A 4th Edition September 11, 2012-00
Select Data
Select Record Result Data
Select either User Data result or Factory Data.
The default setting during normal operation is “User Data”. The
system should only be switched to “Factory Data” when advised
by Yokogawa Laser Analysis Division. Note: recording Factory Data
is only for specific diagnostic purposes and should not be selected
under normal operation.
9.1 Configuring Data Capture: