Yokogawa ADMAG CA - Manual (Page 91)

IM 1E8B0-01E
12-1
12. PARAMETER SUMMARY
12. PARAMETER SUMMARY
This appendix describes all parameters used by ADMAG CA.
• Description of Items
No.
CA AE BT BT
Name
Data Range, Units Deci-
mal
Point
Initial
Setting
R/W Description
Parameter number on the ADMAG CA display panel
Parameter number on BT display
Parameter name on BT display
“00 - 20” are the numbers that can be set on the ADMAG
CA. The desired number can be entered when “S” is displayed.
Indicates the range of allowable settings and the units used.
8 alphanumerics can be entered when “8 ASC II characters” is specified.
Indicate initially set value (When shipped from the factory)
R : Display only W : Write enabled
Describes the nature of the parameter
Numbers indicate the position of decimal point and its range
of movement within the data display.
ADMAG AE display panel :
8 8 :
4
8
3
8
2
8
1
8
0
Example :
0 to 4: Can be moved in the range 0 to 4
4 : Fixed at 4
Description