Yokogawa ADMAG CA - Manual (Page 36)

IM 1E8B0-01E
5-7
5. BASIC OPERATING PROCEDURES
(4) Display of 5-digit Data
• The data display area has four digits and
can therefore not display span and other 5-
digit data parameters.
To display such data, the data is automati-
cally shifted (scrolled) to the left one digit
at a time .
When a 5-digit parameter is selected, the
delimiter " : " starts to flash.
• When the flashing segment is aligned with
the last digit and the data includes a space,
the data is displayed as shown “4” on the
right.
(5) Display of 6-digit Data
• The data display area has four digits and can therefore not display span and other 6-
digit data parameters. (E05 TL SET VALUE is the only 6-digit parameter.)
Like 5-digit data, 6-digit data is displayed by automatically shifting (scrolling) it to
the left one digit at a time.
(6) Display and Setting Coded Data
• Example of change : Changing from +120 to -120
Item Display Content
SET SHIFT INC
SET SHIFT INC
SET SHIFT INC
The display on right indicates "+120".
Cause the "+" sign to flash.
Press the INC key to change the "+" sign to a "-" sign.
Press the SET key twic.
1. Selecting
Coded Data
2. Coded Data
Flashes
3. Change of
Coded Data
1
1 second
1 second
1 second
1 second
1 second
1 second
(Space)
(Space)
3 seconds
Display example : Display of span 123.45
2
3
4
5
6
7