Yokogawa ADMAG CA User Manual

Page 33

IM 1E8B0-01E

5-4

5. BASIC OPERATING PROCEDURES

(1) Changes in Flow Data Display Items

• Shows how the display changes when the flow converter switches are pressed.
• See Chapter 7 for information on changes using the BT200.

SET SHIFT INC

The display shown when the
power is turned on.

Press the SET key to go to the
data mode shown above.

Press the INC key twice to
display d1:00.

SET SHIFT INC

Press the SET key once and all
data starts to flash.

Wait 2 to 3 seconds and press the
SET key again to return the hatched
portion to its original position.

Press the INC key to select
the number of the desired display
type.

Press the SET key to move the
hached portion (flashes)
to the last digit.

SET SHIFT INC

When all setting have been made,
hold down the SHIFT key while
pressing the SET key to return to
original display mode.

00 : Instantaneous flow rates (%)
01 : Instantaneous flow rates (actual meter

values)

02 : Forward flowrate totalization values
03 : Reverse flowrate totalization values
04 : Differetial Between the forward and

reverse totalization values

05 : Alternate display of forward flowrate

% and forward flowrate totalization
values

Selection

Hatched portion flashes

Hatched portion flashs

Hatched portion flashes

Hatched portion
flashes