IEI Integration WAFER-945GSELVDS2 User Manual
Page 93
WAFER-945GSELVDS2
Page 81
Î
UDMA2
Ultra DMA mode 2, max transfer rate: 33.3 MB/s
Î
UDMA3
Ultra DMA mode 3, max transfer rate: 44 MB/s (To use this
mode, it is required that an 80-conductor ATA cable is used.)
Î
UDMA4
Ultra DMA mode 4, max transfer rate: 66.6 MB/s (To use this
mode, it is required that an 80-conductor ATA cable is used.)
Î
UDMA5
Ultra DMA mode 5, max transfer rate: 99.9 MB/s (To use this
mode, it is required that an 80-conductor ATA cable is used.)
S.M.A.R.T [Auto]
Use the S.M.A.R.T option to auto-detect, disable or enable Self-Monitoring Analysis and
Reporting Technology (SMART) on the drive on the specified channel. S.M.A.R.T predicts
impending drive failures. The S.M.A.R.T BIOS option enables or disables this function.
Î
Auto D
EFAULT
BIOS auto detects HDD SMART support.
Î
Disabled
Prevents BIOS from using the HDD SMART feature.
Î
Enabled
Allows BIOS to use the HDD SMART feature
32Bit Data Transfer [Enabled]
Use the 32Bit Data Transfer BIOS option to enables or disable 32-bit data transfers.
Î
Disabled
Prevents the BIOS from using 32-bit data transfers.
Î
Enabled D
EFAULT
Allows BIOS to use 32-bit data transfers on supported
hard disk drives.