2 sata drive connection, Figure 4-11: audio kit cable connection – IEI Integration WAFER-945GSELVDS2 User Manual

Page 69

WAFER-945GSELVDS2

Page 57

Figure 4-11: Audio Kit Cable Connection

Step 3:

Connect the audio devices. Connect speakers to the line-out audio jack.

Connect the output of an audio device to the line-in audio jack. Connect a

microphone to the mic-in audio jack.

Step 0:

4.8.2 SATA Drive Connection

The WAFER-945GSELVDS2 is shipped with two SATA drive cables and one SATA drive

power cable. To connect the SATA drives to the connectors, please follow the steps

below.

Step 1:

Locate the connectors. The locations of the SATA drive connectors are shown

in Chapter 3.