IEI Integration IMB-Q770 - Manual (Page 103)

IMB-Q770 Mic ro -ATX Mo th e rb o a rd
P a g e 87
5.3.10.2 S e ria l P o rt 7 Co n fig u ra tio n
 Serial Po rt [En ab led ]
Use the Serial Port option to enable or disable the serial port.

Disabled Disable the serial port

Enabled D EFAULT Enable the serial port
 Ch an g e S ettin g s [Au to ]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.

IO=2B0h;
IRQ=11
Serial Port I/O port address is 2B0h and the interrupt
address is IRQ11

IO=2B0h;
IRQ=10, 11
Serial Port I/O port address is 2B0h and the interrupt
address is IRQ10, 11

IO=2B8h;
IRQ=10, 11
Serial Port I/O port address is 2B8h and the interrupt
address is IRQ10, 11

IO=2C0h;
IRQ=10, 11
Serial Port I/O port address is 2C0h and the interrupt
address is IRQ10, 11

IO=2C8h;
IRQ=10, 11
Serial Port I/O port address is 2C8h and the interrupt
address is IRQ10, 11
 Device Mo d e [No rm al]
Use the Device Mode option to change the serial port mode.

Serial Port
Function Mode
D EFAULT Enables the serial port to function in serial port
function mode.