IAI America E-Con - Manual (Page 92)

84
7.
ASEL, PSEL
and SSEL
(3) DeviceNet connectors
The following connectors by Phoenix Contact are used for the board-end and cable-end connectors:
Board-end connector: MSTBA2.5/5-G-5.08AU
Cable-end connector: SMSTB2.5/5-ST-5.08AU
Color stickers corresponding to the wire colors are attached on each connector.
The cable-end connector is a standard accessory.
For the details of signals assigned to respective pins, refer to Chapter 9, “Common Items and Others.”
Caution
(1) The baud rate is automatically set to the same value as the baud rate set in the master.
Accordingly, you need not set the baud rate.
(2) The node address is set by I/O parameter No. 226.