IAI America E-Con - Manual (Page 46)

38
3. XSEL-R/S/RX/SX/RXD/SXD
3.4 Parameter Settings
Set to the I/O parameters in the controller by using a teaching tool.
Place the controller's AUTO/MANU switch in the MANU position.
The teaching tool version applicable for this controller is as shown below:
• XSEL PC software : V9.00.00.00 to
• SEL-T/TG : V1.12 to
• IA-T-X/IA-T-XD : V1.52 to
Network I/F module 2
DeviceNet board
I/O Parameter No.225
I/O Parameter No.231
I/O Parameter No.232
I/O Parameter No.233
I/O Parameter No.234
I/O Parameter No.237
I/O Parameter No.238
I/O board 2
I/O Parameter No.4
I/O Parameter No.5
I/O Parameter No.11
I/O board 1
I/O Parameter No.2
I/O Parameter No.3
I/O Parameter No.10