IAI America E-Con - Manual (Page 44)

36
3. XSEL-R/S/RX/SX/RXD/SXD
3.2 Interface Specifications
Item Specification
Communication
protocol DeviceNet 2.0
Group 2 only server
Network-powered insulation node
Communication
specification Master-slave connection Bit strobe
Polling
Cyclic
Baud rate 500 k / 250 k / 125 kbps
Communication
cable length Baud rate Maximum network
length Maximum branch
line length Total branch line
length
500 kbps 100m
6 m
39 m
250 kbps 250 m 78 m
125 kbps 500 m 156 m
Note) When a large-size DeviceNet cable is used.
Communication
power supply 24 VDC (supplied from DeviceNet)
Consumption
current of
communication
power supply 60 mA
Number of occupied
nodes 1 node
Connector MSTB2.5/5-GF-5.08AU (*1) by PHOENIX CONTACT
(*1) The cable-end connector is a standard accessory.
SMSTB2.5/5-STF-5.08AU by PHOENIX CONTACT