IAI America E-Con - Manual (Page 35)

27
2. X-SEL-J/K/P/Q/JX/KX/PX/QX
2.5.2 Setting Example for P/Q Types
(1) Setting example when only a DeviceNet board is installed
Assign 32 input points and 16 output points to the DeviceNet board from the first standard I/O port, as you
would for the standard X-SEL I/O board (50-pin connector), and do not use any other I/O port.
Not used.
Input port Nos. 000 to 015
Output port Nos. 300 to 315