General Tools and Instruments GTi10-20-30-50 - Manual (Page 53)

53
Camera Connections
Charging the Battery Directly
You can charge the battery directly using the optional power adaptor.
1
Swing the rubber cover on the bottom of the camera
down to expose the power terminal on the right side.
Insert the single-plug end of the power adaptor into the
terminal.
2
3
Plug the other end of the adaptor into a 110VAC outlet.
4 The LED on the camera’s keypad will flicker
while the battery is charging. When charging is
complete, the LED will stop flickering and steadily
glow green.
Unplug the power adaptor from the power outlet
after charging.