General Tools and Instruments GTi10-20-30-50 - Manual (Page 40)

40
Profile Analysis
1 Make sure that the camera is in
null mode (see p. 14).
Press the
MENU/ENTER button to open the
Main Menu.
2
Press the UP or DOWN arrow to
navigate to the Analysis line. Then
press the MENU/ENTER button to
open the Analysis menu.
3 Use the UP or DOWN arrow to
navigate to the Profile line.
Then
press the MENU/ENTER button to
open a profile.
4
Moving a profile.
• Start from Step 1 to select profile
analysis.
• Press the UP or DOWN arrow to
move the profile.
5
Removing a profile.
•
Use Steps 1 through 3 to select a profile.
•
Press and hold the ESC button to remove it.
Shooting
Using Analysis Tools
Temperature
distribution