General Tools and Instruments GTi10-20-30-50 - Manual (Page 10)

10
Setup Instructions
Charging the Battery
Use the following procedures to charge the battery pack for the first time and
subsequently when the low battery icon appears on the LCD.
1
Position a battery in the
compact battery charger so the
contacts nearly touch. Push
the battery forward until it
snaps into place.
2
Plug one end of the power cord into the charger and the other end
into a 110VAC outlet.
• The light on the charger will glow red while the battery is
charging. It will turn green when charging is complete.
• After charging, unplug the battery charger and remove
the charged battery.
• This is a lithium ion battery pack so there is no need to
discharge it completely before recharging. It can be recharged
at any time. However, since the maximum number of charge
cycles is approximately 300, to prolong battery life General
recommends that you only charge the battery pack after it has
been discharged completely.
• Charging times will vary according to the surrounding
humidity and battery pack charge state.
the bat
snaps i