General Tools and Instruments GTi10-20-30-50 - Manual (Page 23)

23
Shooting
Making Camera Adjustments
Thermal, Visual and BiVision Image Displays
The GTi20 and GTi30 thermal cameras can also record visual images using a
built-in digital camera. The reason to capture a visual image is to use it as a
reference for a thermal image.
1
Press the MENU/ENTER button.
2
Press the MENU/ENTER button to
call up the Main Menu. Then press
the UP or DOWN arrow to
navigate to the IR/Visible line.
Press the MENU/ENTER button to
display the IR/Visible Setup
menu.
3
IR/Visible Setup
a) Use the LEFT or RIGHT
arrows to select IR Only,
Vision Only, or BiVision.
b) Press the MENU/ENTER
button to save the
selection, or the ESC
button to return to the
System Setup menu
without making a change.
About the Percentage setting: Sets the ratio of IR image to
Visual image to a value between 1% and 100%.
About IR/Visible settings
Sets the ratio of IR image to Visual image to a value between 1% and 100%.