General Tools and Instruments 860 v.1 - Manual

SAFETY RULES FOR A HANDHELD ROUTER AND ROUTERS USED WITH A ROUTER TABLE
1. KNOW YOUR ROUTER. Read the owner’s manual carefully before use. Learn the router's applications and limitations, as well as the
specific potential hazards involved in its use.
2. KEEP GUARDS IN PLACE and in working order.
3. GROUND ALL TOOLS. Most routers are equipped with a three-prong plug, and it should be plugged into a three-hole electrical outlet. If an
adapter is used to accommodate a two-prong outlet, the adapter lug must be attached to a known ground, such as the outlet holding
screw. Never remove the third prong.
4. REMOVE ANY ADJUSTING KEYS AND WRENCHES. Make it a habit to check that keys and adjusting wrenches are removed from the router
before operating.
5. KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
6. AVOID POTENTIAL DANGERS. Don’t use your router in damp or wet locations, or expose them to rain. Keep work area well lighted.
7. KEEP CHILDREN AND VISITORS AWAY. Distractions can easily lead to accidents — your own or others’.
8. MAKE YOUR WORKSHOP CHILDPROOF. Use pad-locks, master switches, or remove start keys.
9. DON’T FORCE THE ROUTER. It will do the job better and safer at the rate for which it was designed.
10. WEAR PROPER APPAREL. No loose clothing, gloves, neckties, or jewelry to get caught in moving parts. Nonslip footwear is recommended.
Wear protective hair covering to contain long hair.
11. USE SAFETY GLASSES.
12. USE A FACE OR DUST MASK.
13. DON’T OVERREACH. Keep your proper footing and balance at all times.
14. MAINTAIN YOUR ROUTER IN TOP CONDITION. Keep router bits sharp and clean for best and safest performance. Follow instructions for
lubricating and changing accessories.
15. DISCONNECT YOUR ROUTER BEFORE SERVICING. Also when changing bits, blades, cutters and other accessories.
16. USE ONLY RECOMMENDED ACCESSORIES. Consult the owner's manual for recommended accessories. The use of improper accessories
may cause hazards.
17. AVOID ACCIDENTAL STARTING. Make sure switch is in “OFF” position before plugging in cord.
18. NEVER STAND ON A TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is accidentally contacted.
19. CHECK FOR DAMAGED PARTS. Before further use of the router, a guard or other part that is damaged should be carefully checked to
ensure that it will operate properly and perform its intended function. Check for alignment of moving parts, breakage of parts, mounting,
and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.
20. ROUTER TABLE DIRECTION OF FEED. Feed work into the cutter.
21. NEVER LEAVE THE ROUTER RUNNING UNATTENDED. Turn power off, and stay with router until it comes to a complete stop. Before leaving,
assure that power cannot be turned on accidentally. Use pad-locks, master switches, or remove start keys.
22. AVOID DRUGS, ALCOHOL, AND MEDICATION. Do not operate the a router while under the influence of drugs, alcohol or medication.
DOVETAIL JIG No. 860
USER’S MANUAL
INTRODUCTION
Thank you for purchasing General’s DOVETAILER ™ Dovetail Jig. A simple and easy way to make professional furniture joints.
1