Setup instructions – General Tools and Instruments GTi10-20-30-50 User Manual
Page 12
12
Setup Instructions
The LED at the upper left of the keypad will be lit whenever the camera is powered on.
To power on:
1
Remove the lens cap and
flip up the LCD to expose
the keypad.
2
Press and hold the
button for 3 seconds.
•
On the GTi10 and GTi20, the LED
at the upper left of the keypad will
glow green. On the GTi30 and
GTi50, the LED will toggle between
green and blue, indicating that the
camera is ready for a Bluetooth
connection.
3
After a few seconds, this
System Information startup
screen will appear and take
40 seconds to clear.
To power off:
Press and hold the power button for three seconds. The LED will
extinguish.
Powering On and Off
Button
See also other documents in the category General Tools and Instruments Tools:
- 119 (1 page)
- 1478 (1 page)
- 146 (2 pages)
- 147 (1 page)
- 80560 (1 page)
- 840 Pro Doweling Kit (36 pages)
- 840 use of Dowel Centers (4 pages)
- 841 (8 pages)
- 849 (2 pages)
- 850 (2 pages)
- 860 v.1 (16 pages)
- 860 v.2 (44 pages)
- 860 Addendum (1 page)
- 870 v.1 (2 pages)
- 870 v.2 (46 pages)
- 880 (2 pages)
- 861 (16 pages)
- AQ150 (16 pages)
- AT60LR (1 page)
- BAR4225 (13 pages)
- BF10 (12 pages)
- CA10 (16 pages)
- CAF4221 (12 pages)
- CAF4224 (14 pages)
- CDM77232 (15 pages)
- CDM77535 (12 pages)
- CGD900 (12 pages)
- CIH20DL (28 pages)
- CL10 (20 pages)
- CMM880 (11 pages)
- CMR35 (36 pages)
- CPH12101 (1 page)
- CT101 (8 pages)
- CT102 (8 pages)
- CT103 (8 pages)
- CT6235B (16 pages)
- DA833 (16 pages)
- DAF2005MDL (27 pages)
- DAF3300 (40 pages)
- DAF3010B (12 pages)
- DAF4207SD (16 pages)
- DAF4223 (13 pages)
- DAF80PWM (10 pages)
- DAF80PW (10 pages)
- DBAR110 (16 pages)