FEC AFC1500 - Manual (Page 9)

Install all tools firmly where they can bear the maximum torque
Failure to observe this instruction may cause
Install the AXIS Unit firmly
Failure to observe this instruction may cause
Use the specified tool for the AXIS
Failure to observe this instruction may cause
The AXIS (SAN) Unit shall
Failure to observe this instruction may cause
Do not block the ventilation hole
Avoid any foreign body from entering
Failure to observe this instruction may cause
The power source shall be provided with safety measures
protectors. Failure to observe
Do not use tools or AXIS (S
Failure to observe this instruction may cause
Do not get on the top of equipment or do not place heavy
Failure to observe this instruction may cause
Do not subject the equipment
Failure to observe this instruction may cause
Apply proper wiring size and firmly
Failure to observe this instruction may cause
Operate the equipment within the specified power supply voltage
Failure to observe this instruction may cause
Take sufficient measures to
conditions:
◆ Location where electrical
◆ Location where the equipment is subjected to
◆ Location near a high
Failure to observe this instruction may cause
Safety Precautions
Installation / Wiring
ix
where they can bear the maximum torque during operation.
this instruction may cause injury and malfunction.
inside the control panel using the specified screws.
this instruction may cause malfunction.
Use the specified tool for the AXIS (SAN) Unit.
this instruction may cause fire and malfunction.
nit shall maintain the specified distance from other devices.
this instruction may cause fire and malfunction.
ventilation hole of the AXIS (SAN) Unit.
from entering inside the equipment.
this instruction may cause fire and malfunction.
The power source shall be provided with safety measures such as breakers
Failure to observe this instruction may cause fire and malfunction.
(SAN) Units that are damaged or missing parts.
this instruction may cause fire, injury and malfunction.
get on the top of equipment or do not place heavy objects on the top of equipment.
this instruction may cause injury and malfunction.
equipment to excess shock and impact.
this instruction may cause malfunction.
and firmly tighten all termination points.
this instruction may cause injury, false operation and malfunction.
Operate the equipment within the specified power supply voltage.
this instruction may cause injury, electric shock, fire and malfunction.
measures to shield the equipment when operating the in the following
electrical noise is generated
where the equipment is subjected to a strong electric field or magnetic field
high power wire.
this instruction may cause injury, false operation, and malfunction.
Caution
Safety Precautions
Installation / Wiring
during operation.
such as breakers and circuit
on the top of equipment.
and malfunction.
injury, electric shock, fire and malfunction.
hen operating the in the following
magnetic field
injury, false operation, and malfunction.