FEC AFC1500 - Manual (Page 25)

AFC1500 Multi-2 Unit Hardware Manual (Rev.2)
PAGE 3 - 3
Chapter 3: System Description
(RS232C) PC Port
(RS422) Display Port
(RS232C) Data-Out Port #1
(RS232C) Data-Out Port #2
(RS232C) Data-In Port
Interface Board
Power Connector
Power ON LED
Busy LED
Accept LED
Reject LED
Abnormal LED
Reset Button
Start Button
Reverse Button
Calibration Button
RS485 Port
Ethernet U/C Port
Ethernet U/C
Status LED
(RS232C) Data-In Port
(RS232C) Data-Out Port
Ethernet Reset Button
Ethernet Network Port
(RS422) Display Port
Ethernet U/C
Status LED
3.2 Unit Description
AFC MULTI – 2 Standard Version
The standard version of the Multi-2 unit includes both an RS232 port (PC Port) and Ethernet
port (Ethernet U/C Port) for communicating to a computer running the AFC User Console
Software. (Only one may be used at a time)
* Discrete I/O Interface Board Shown. (RS232C)Data-Out 2 and (RS422) Data-In are not used.
AFC MULTI – 2E Ethernet Version (Optional)
The optional ethernet version of the Multi – 2 unit adds the functionality of an additional ethernet
port for FASTENING DATA COMMUNICATION protocols to external systems as well as User
Console connectivity. Existing protocols include; QDAS, ToolsNet®, FECNet as well as custom
Protocols. The RS232 PC Port and Data-Out 2 port are removed using this configuration.