Micromod MOD: 30ML Operation and Template Setup - Manual (Page 19)

MOD 30ML Operation
SETUP
2-9
Table 4. Device Events
Step Step Description Line 1 Line 2 Line 6 Entry Description
4 Device Events (Entry)
∇ moves down to Step 4A
NXT goes to Step 5 (About)
PRV goes to Step 3 (I/O)
*DEVICE* NOT CFGD
or
DEV TAG
EVENTS
4A Block Event Codes
∆ show block event
∇ show event time and type
NXT, PRV change step
INST IN
01/09/96
RUN
08:29:34
IF 1
INFOONLY
Line 1 & 2 = event text, Line 3 =
event code, Line 6 = block type and
number. Example shown is
Interface block event (line 3 = code
137, Instrument in RUN state) at
date and time indicated on page 2
(line 3 = msec). See Appendix A
for block event code descriptions.
Use block type (line 6) and event
code (line 3) to find the description.
4B Block Event Codes (Cont’d)
∆ show block event
∇ show event time and type
NXT, PRV change step
EVENT Q
01/01/96
CLEARED
08:00:00
SE 1
INFOONLY Same as above for System Event
block event (code 24). See
Appendix A for block event code
descriptions. Use block type (line
6) and event code (line 3) to find
the description.
4X Device Events (Exit)
∆ moves up to Step 4.
NXT, PRV change step
EVENTS *DEVICE*
Table 5. About This Device
Step Step Description Line 1 Line 2 Line 6 Entry Description
5 About this Device (Entry)
∇ moves down to Step 5A
NXT goes to Step 6 (Template)
PRV goes to Step 4 (Events)
*DEVICE* NOT CFGD
or
DEV TAG
ABOUT
5A Firmware Version
∆ moves up to Step 5.
NXT, PRV change step
FW VERS I1A 1.0 ISA01
5B Display Version
∆ moves up to Step 5.
NXT, PRV change step
DISP VER 5.1