4 check ip communication with controller, Check ip communication with controller, Figure 70: network connections screen – MaxPower Corp Gamatronic Power+ M50-RM User Manual
Page 78
Gamatronic Electronic Industries Ltd.
POWER+ RM
50
K
VA, N.Am. Std. – User Guide, Release 1.9
62
5.15.4
Check IP Communication with Controller
This test is designed to verify that the System Controller is properly configured for communication
and that the Web server built-in into the System Controller is functioning properly.
1.
Use an RJ45-to-RJ45 crossed cable to attach a laptop computer to the Ethernet (RJ45)
port on the rear panel of the System Controller.
2.
Configure the Network Connections of the laptop computer to make sure the computer
is in the same domain as the UPS. (Note: the details of the following configuration
procedure are for the Windows XP operating system. The configuration procedure will
differ for other operating systems.)
a.
Right click on the My Network Places icon on your desktop and select Properties.
Figure 70: Network Connections screen
b.
When the Network Connections screen appears, right-click on Local Area
Connection and select Properties.