MaxPower Corp Gamatronic Power+ M50-RM - Manual (Page 172)

Gamatronic Electronic Industries Ltd.
POWER+ RM 50 K VA, N.Am. Std. – User Guide, Release 1.9 156
9.3.7 “Configuration” main menu option
Choosing the “Configuration” option on the Web interface’s main menu displays the Configuration
(sub) menu. Through this menu, various important UPS settings can be modified. The options in
the Configuration menu are described below.
Figure 311: Configuration menu
Selecting any of the options in the Configuration menu causes the Web interface to prompt for a
user-ID and password. The factory default user-ID is admin, and the factory-default password is
also admin. These default values for the user-ID and password can be changed, as is explained
below in section 9.3.7.3 on page 158.
After entering the correct user-ID and password and then pressing Enter, the requested screen is
displayed.
The user-ID and password are only requested once per session, on the first entry into any of the
Configuration menu options.
Warning: When an IP address or addresses are specified for a given community, only the
specified addresses have access to the community. All other users will be shut out from
the defined community.