1 network configuration, 2 “date and time” – setting the calendar and clock, Network configuration – MaxPower Corp Gamatronic Power+ M50-RM User Manual
Page 173: Date and time” – setting the calendar and clock
Gamatronic Electronic Industries Ltd.
POWER+ RM
50
K
VA, N.Am. Std. – User Guide, Release 1.9
157
9.3.7.1
Network configuration
The “Network configuration” option on the Configuration menu is equivalent to navigating to
Setup > Service > SC2012 > Network on the Power+ physical control panel. Here you define
the parameters needed to communicate with the Power+ over an intranet or over the Internet.
Consult your local network administrator for the proper IP address, subnet mask, and Gateway
address.
Figure 312: Configuring network communication parameters
9.3.7.2
“Date and time” – setting the calendar and clock
The “Date and time” option on the Configuration submenu is used to set the date and time of the
Power+ internal calendar and clock. The date and time settings are important, for they are used
to timestamp entries in the Power+ log.
The date and time are kept current by the Power+, including when the system is in the “off” state.
Click the Back button to return to the Configuration menu.
Figure 313: Setting the Power+ internal date and time