MaxPower Corp Gamatronic Power+ M50-RM User Manual
Page 182
Gamatronic Electronic Industries Ltd.
POWER+ RM
50
K
VA, N.Am. Std. – User Guide, Release 1.9
166
Figure 322: Connections between the Power+ controller and the Wing
5.
Connect the supplied power cable between the 12 Vdc socket on the left side of the
controller rear panel and the Wing.
6.
On a computer that is connected to the same network as the Power+, open a web
browser, type the IP address of the Power+ into the URL bar, and press Enter.
The home page of the Power+ web interface is displayed.
(If you do not know the Power+'s IP address, you can see it by pressing and holding the
Esc button for 2 or 3 seconds and then choosing "Network" on the displayed menu.)
Verify that an antenna symbol resembling a trident appears in the lower left corner of
the browser window. This indicates that the Wing has a cellular connection.
Figure 323: Home screen of the Power+ web interface