MaxPower Corp Gamatronic Power+ M50-RM - Manual (Page 17)

Gamatronic Electronic Industries Ltd.
POWER+ RM 50 K VA, N.Am. Std. – User Guide, Release 1.9 1
1. I
NTRODUCTION
Thank you for purchasing a POWER+ UPS system. POWER+ is the most sophisticated UPS on
the market today.
In general, an Uninterruptible Power Supply (UPS) provides backup power for use when the utility
AC electric power mains fail or drop to an unacceptable voltage level. POWER+
is a whole lot
more.
POWER+ is designed to protect your data and equipment and minimize downtime and other
adverse effects normally incurred by power irregularities and failures.
POWER+ continually eliminates surges, spikes and sags that are inherent in commercial utility
power. Over time, these irregularities shorten the life of equipment and components. The
efficiency of POWER+ thus helps to extend the life of your equipment, even through normal use
when the input power system is constant and continuous.
POWER+ requires very little attention or inter v ention during normal operation; however, you
should read and understand the procedures described in this manual to ensure trouble-free
operation.
POWER+ is a parallel redundant UPS and is flexible in structure, allowing it to be easily extended
by adding modules as required. The UPS modules are designed for hot swapping, making many
different configurations possible.
The POWER+ RM 50 K VA model (RM stands for "rack mount") fits into a standard 19” wide
enclosure.
1.1 POWER+ has many unique
features:
POWER+ is:
 Reliable, thanks to its N+ 1 parallel redundancy.
 Both flexible and modular; it may include from one to ten modules.
 A true on-line battery design according to IEC62040-3.
 A "green" power solution thanks to a THD of 5 % at the input, and provides
“clean” power to your loads.
 A UPS that employs active current sharing at the input / output.
 A UPS that has an overall efficiency of up to 96 % and a backup efficiency of 98 %.
 Light and small, a 10 kVA module weighs approximately 22 lb. (10 Kg).