FlexLink Elevator Руководство пользователя - Manual (Page 65)

Installation and adjustment
Create
d
by EBCCW
0
0
:06
57 5112204
6. Are there any products that
do not run over the
transitions uninterruptedly. Yes / No Check the setting of the transition distance or
the transition roller. See section 5.2.2 on page
39 ‘integration elevator’.
7. Is the product correctly
supplied / discharged at the
input / output track. Yes / No The system designer has determined this and
will have guidelines with respect to this and
know how to adjust an incorrect output.
8. Is the product properly
transported through the
elevator. Yes / No The product may not move on the track. If so,
contact the supplier
9. Can any irregularities be
found in the chain guide. Yes / No The lifting device may not get stuck anywhere
or find resistance, otherwise this is to be
reworked or improved