FlexLink Elevator Руководство пользователя - Manual (Page 43)

Unload the elevator
Create
d
by EBCCW
0
0
:06
35 5112204
4.2 Unloading instructions
Before starting unloading, all fastening means (securing belts, screws, etc.)
that secure the Elevator unto the means of transport must be removed.
Subsequently check whether the transport supports are still connected well
to the Elevator. After this the unloading procedure may be started.
4.2.1 Erecting the Elevator See Erecting the Elevator on page 37
When putting upright, just like when moving the Elevator, make sure that
the floor is level and clean and has sufficient carrying capacity. At the mo-
ment the Elevator is on the correct place it can be put upright. Dependent
on the situation the Elevator can be put upright using a hoist, a crane or a
forklift truck.
Device(s)
.
Note! Make sure when putting upright there is enough space /
height to put the Elevator upright!
Hoist
• The hoisting device is to be fastened to the top of the Elevator.
While hoisting the hoist should be well fixed and may not ride/shift
away unexpectedly.
• After having mounted the adjusting feet the Elevator can be put
upright. Now the hoisting device can calmly hoist the Elevator in
the upright position.
Hoist Crane Open-end spanner