FlexLink Elevator Руководство пользователя - Manual (Page 46)

Installation and adjustment
38 5112204
5 Installation and adjustment
This section deals with the operations to have the elevator function well
within a (transport) system. First section 1.2 on page 4, in which the provi-
sions to be taken care of are given, should be studied carefully. section 1.3
on page 6 is particularly important for the elevators that are delivered to the
end user not fully assembled.
5.1 Provisions to be provided
Make sure before integrating that the surroundings are clean and free from
obstacles and the mounting surface is clean and level. Besides, it should
be repeated that the operations are to be carried out in a calm and control-
led way!
After having placed the elevator in the correct position, the elevator is to be
fastened to the mounting surface by using the holes in the adjusting feet.
The elevator has an input and output and these are to be connected to the
connecting tracks. Correct adjustment determines the quality of the sys-
tem.
Figure 18 In feed and discharge
Connecting track
Elevator
Connecting track
Input/output
without
connecting track