FlexLink Elevator Руководство пользователя User Manual
Page 15
Safety
Create
d
by EBCCW
0
0
:06
7
5112204
.
Note! If it cannot be made sure that there will be no product on
the machine that exceeds the minimum or maximum dimensions
(see technical specification), the detector described below must
be installed on the Elevator.
. .
Note! Only technically qualified employees are allowed to
change the settings of the safety provisions.
Height / width
detector
The product that is put into the Elevator may not get stuck as a result of a too
high / wide or twisted product.
In order to ensure that products fit in the Elevator and will not get stuck, the
input of the Elevator can be checked for height / width.
This detection must take place well before the Elevator prior to putting the
product on the Elevator.
The maximum dimensions of the product are given in the technical
specification.
Mechanical Remark
Transition guard
At the transition between the Elevator and a connected conveyor a guard must
have been placed, so that persons are kept at a reaching distance from the
transition.
Do not use the Elevator as a platform for maintenance work or in the production,
use equipment intended for these purposes.