FlexLink Elevator Руководство пользователя - Manual (Page 14)

Safety
6 5112204
1.3 Description of safety provisions
As a standard the Elevator is not provided with control and any safety pro-
visions. Before putting the Elevator into operation some safety provisions
are to be taken care of. The purpose of these safety provisions is to protect
the user, the product and the Elevator against undesired situations (dam-
age). Without these safety provisions FlexLink cannot give a guarantee on
any damage caused in absence of these safety provisions.
The table below gives a general description of the safety provisions re-
quired. Here it should be noted that only technically qualified employees
are allowed to work on the settings of the safety provisions!
Control Remark
Emergency stop switch Each Elevator is to be provided with one or more emergency stop switches
that can be operated within reach of the user.
The switch must have the standard red colour.
The emergency stop switch must make sure that the input and output
tracks are switched off simultaneously.
Motor protection The technical specification of the Elevator is, among other things, geared
to the load given in the order confirmation.
Should the Elevator (motor) be overloaded for certain reasons, this should
be detected. Without this protection there is a chance that the Motor or
other components of the Elevator will be damaged.