FlexLink Elevator Руководство пользователя - Manual (Page 11)

Safety
Create
d
by EBCCW
0
0
:06
3 5112204
1 Safety
The Elevator has been designed in such a way, that it can be used and
maintained in a safe way. This holds for the application, the circumstances
and the instructions described in the manual. Any person working with or
on this machine should study the manual and follow the instructions. It is
the responsibility of the employer to make sure that the employee is familiar
with and follows these instructions.
The company or the country in which the machine is used may require ex-
tra safety measures. This particularly applies to the working conditions.
This manual does not describe how these are to be complied with. In case
of doubt, consult your government or safety officer!
1.1 System information
The project number and/or general drawing number shall always be spec-
ified when communicating with FlexLink with respect to the elevator.
Figure 1 Machine nameplate
The machine nameplate is located on the electrical cabinet as shown in the
figure above.
Project number See machine nameplate
Supplier FlexLink Engineering Polska
Sp. z.o.o
ul. Za Motelem 2c
62-080 Sady, Poland
Machine type: Elevator
Date of manufacture See machine nameplate
Gen. drwg. no. See machine nameplate