beautypg.com

6 apu ignition battery interface connector, Fig. 4-7 apu ignition battery connector, Apu ignition battery interface connector – Alpha Technologies AlphaGen 5.0kW Auxiliary Power Unit User Manual

Page 72: Fig. 4-7, Apu ignition battery connector, Interconnection, 3 connectors, continued

background image

4. Interconnection

72

031-132-B0-001 Rev. A

TM

©2000

4.3.6 APU Ignition Battery Interface Connector

The interface control is a 2-pole Anderson connector:

Pin 1 = +12VDC activates (opens) solenoid ONLY when APU is running.

Controlled by APU engine ON command)

Pin 2 = Solenoid common (negative) connection.

See Fig. 4-1 for location.

Pole

Description

Function

RED

Ignition Battery POSITIVE To Ignition battery Positive post – APU

Starter connection

BLK

Ignition Battery NEGATIVE To Ignition battery Negative post – APU

Chassis Ground

5('

5('

5('

%/.

%/.

%/.

UPÃDBIDUDPIÃ76UU@S`

ASPHÃ6QVÃTU6SU@S

ASPIUÃUPQÃWD@X

4.3

Connectors, continued

Fig. 4-7 APU Ignition Battery Connector

See also other documents in the category Alpha Technologies Equipment: