Franklin Fueling Systems TS-TPI - Manual (Page 34)

TS-TPI DATA AND REPORTS Page 6-3 6
TS-TPI Installation and Wiring Guide
Pump DISPLAY examples:
Each controller type will vary in the available
data that can be displayed. The example
below is for the SCI controller.
Here is the first display of three possible
(typical) data displays...
Press the DOWN key to scroll through the
data displays.
6) Press the CANCEL key to return to the
SELECT PUMP menu.
The display returns to the SELECT PUMP
menu.
Repeat the data display steps for each
pump.
Use the CANCEL key to return to the
SELECT MENU OPTION display.
See Appendix A for Status Code
and Fault Code definitions. NOTE
PUMP1 STATUS FAULT VOLTS CVOLT 1
PUMP N 0071 00 204 201
PUMP1 AMPS C AMPS1 WATTS C WATTS
PUMP N 6.5 6.5 1140 1140
PUMP1 DIPSW SREV
PUMP N FFFB 103
Please read the Notes on the follow-
ing page to gain a better understand-
ing of the Diagnostic feature. NOTE