Franklin Fueling Systems TS-TPI - Manual (Page 23)

4 Page 4-6 TS-TPI SETUP PROGRAMMING
TS-TPI Installation and Wiring Guide
ADDRESS PUMP 1 READ ONLY
0
ADDRESS “READ ONLY”
Description of Steps:
1) Press the M4 key to display the ADDRESS
PUMP N “READ ONLY” field...
In this example, address “0” is displayed...
The address range is from 0-31.
2) Press the CANCEL key to return to the PUMP
N menu.
Press the DOWN key to display the TANK and
HEIGHT user entry menus...
TANK (user entry)
Description of Steps:
1) Press the M1 key to display the TANK ASSO-
CIATION PUMP N user entry field...
The default TANK ASSOCIATION number “0” is
displayed...
The user selects the tank number associated with
PUMP N. The values range from 0-8(0=none, or
the maximum number of tanks available for the
ATG model)
NOTE: This will allow a pump to be associated
with a tank. If the pump is not associated with a
tank (i.e. for level monitoring by the tank gauge),
then NONE may be chosen, but this will disable
some features of the pump controller interface for
that controller. If a tank has multiple pumps in it,
more than one controller may be associated with
the tank.
2) Use the keypad to enter the tank number.
In the event that a number is already entered and
needs to change, press the M4 key to backspace
and erase the entry. The default “0” tank number
will be displayed.
PUMP N (MORE)
NAME TYPE GROUP ADDRESS
M1 M2 M3 M4
CANCEL
K X
DOWN
SPACE
TANK ASSOCIATION PUMP 1 NUMERIC
0 BACKSPACE
PUMP N (MORE)
TANK HEIGHT
M1 M2 M3 M4