Xylem System 5000 User Manual User Manual

Page 95

Data File Manager

To save the current system configuration,

simply open the Data File Manager and

press the Save Config function button. All

system settings, Tasks, and any installed

Basic Programs will be saved as part of the

configuration.
To load a new configuration onto the

System 5000

™

, select a previously saved

configuration file and press the Load

Config function button. Note that all

system settings and created Tasks will be

overwritten with the new configuration

information. Local files (including Basic

programs) will not be removed by the new

configuration. The system will reboot to

finalize the loading process.

Updating System 500

™

Firmware

Frequent updates will become available

for the System 5000

™

that will improve not

only the core functionality of the unit, but

also add extra features and improvements

to the system. Upgrading to new firmware

will not affect the current settings or

configuration of the System 5000

™

. Typical

upgrades will take between 5-10 minutes

to complete and are initiated through the

Data File Manager.

After a firmware upgrade file has been

downloaded (most likely from the

waterlog.

com

web site) and stored on

SD card or USB thumb drive, select the firmware file and press the Firmware Update function button.
The file will then be extracted and the contents verified to allow a clean upgrade to be performed.

Once the file contents have been verified, press the Update button to begin. Over the next period

of time the system will reboot and perform all necessary upgrades. When completed, the Main

Menu screen will appear and the system can be used again.